HOME > Common problem
Classification
What needs to be checked before starting the crusher?
Time of publication：2022-06-20
1. Check whether the flying knife and the bottom knife are fastened according to the specified tightening torque.
2. The clearance between the flying knife and the bottom knife of the crusher shall be within 0.5-1mm (check with thickness gauge).
3. There shall be no metal sundries in the machine.
4. Rotate the belt pulley of the crusher by hand for more than one week, and there shall be no collision sound.
5. The tension of V-belt shall be moderate and the belt cover shall be installed.
6. The electrical system is in normal condition.
7. The joints of the hydraulic system are well sealed without oil leakage.
8. The knife roll and feeding roll run in the correct direction.
2. The clearance between the flying knife and the bottom knife of the crusher shall be within 0.5-1mm (check with thickness gauge).
3. There shall be no metal sundries in the machine.
4. Rotate the belt pulley of the crusher by hand for more than one week, and there shall be no collision sound.
5. The tension of V-belt shall be moderate and the belt cover shall be installed.
6. The electrical system is in normal condition.
7. The joints of the hydraulic system are well sealed without oil leakage.
8. The knife roll and feeding roll run in the correct direction.
